Netgear GS418TPP User Manual - Page 145

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The default password is password. The System Information page displays. 5. Select Switching> VLAN > Advanced > Protocol Based VLAN Group Configuration. 6. In the Group Name field, type a name for the new group. You can enter up to 16 characters. 7. In the Protocol field, enter one or more protocols that must be associated with the group. You can enter keywords such as arp, ip, and ipx. Separate keywords with a comma. You can also enter hexadecimal or decimal values in the range of 0x0600 (1536) to 0xFFFF (65535). 8. In the VLAN ID field, enter the VLAN ID. The ID can be any number in the range of 1 to 4093. All the ports in the group assign this VLAN ID to untagged packets received for the protocols that you included in this group. 9. Click the Add button. The protocol-based VLAN group is added to the switch. 10. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable information displayed on the page. Table 35. Protocol Based VLAN Group Configuration information Field Group ID Ports Description A number used to identify the group created by the user. Group IDs are automatically assigned when a group is created by the user. Display all the member ports that belong to the group. Configure Protocol-Based VLAN Group Membership  To configure protocol-based VLAN group membership: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. Configure Switching 145