Netgear GS418TPP User Manual - Page 65

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > DNS > Host Configuration. 6. In the Host Name (1 to 255 characters) field, specify the static host name to add. Its length cannot exceed 255 characters and it is a required field. 7. In the IPv4/IPv6 Address field, enter the IP address to associate with the host name. 8. Click the Add button. The entry displays in the list on the page. Remove an Entry From the Dynamic Host Mapping Table  To remove an entry from the dynamic host mapping table: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > DNS > Host Configuration. The DNS Host Configuration page displays. 6. Select the check box next to the entry to remove. 7. Click the Delete button. Configure System Information 65