Netgear GS418TPP User Manual - Page 72

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 7. Select the interface. The following table describes the nonconfigurable fields. Table 21. Green Ethernet Remote Device Information Field Description Remote ID The remote client identifier assigned to the remote system. Remote Tw_sys_tx (uSec) Integer that indicates the value of Tw_sys that the remote system can support. Remote Tw_sys_tx Echo (uSec) Integer that indicates the value of Transmit Tw_sys echoed back by the remote system. Remote Tw_sys_rx (uSec) Integer that indicates the value of Tw_sys that the remote system requests from the local system. Remote Tw_sys_rx Echo (uSec) Integer that indicates the value of Receive Tw_sys echoed back by the remote system. Remote Fallback Tw_sys (uSec) Integer that indicates the value of fallback Tw_sys that the remote system is advertising. View the Green Ethernet Statistics Summary This page summarizes the green Ethernet settings currently in use.  To view the green Ethernet statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Green Ethernet > Green Ethernet Summary. Configure System Information 72