Netgear GS418TPP User Manual - Page 333
Sequence Number, Action, Permit, Match Every, False
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Note: For L4 port options, two rules are created (one for TCP and one for UDP). 7. In the Sequence Number field, enter a whole number in the range of 1 to 2147483647 that is used to identify the rule. 8. From the Action menu, select Permit or Deny to specify the action that must be taken if a packet matches the rule's criteria. 9. From the Match Every menu, select one of the following options: • False. Signifies that packets do not need to match the selected ACL and rule. With this selection, you can add a destination MAC address, destination MAC mask, and VLAN. • True. Signifies that all packets must match the selected ACL and rule and are either permitted or denied. In this case, since all packets match the rule, the option of configuring other match criteria is not offered. 10. Specify the additional match criteria for the selected ACL type. The rest of the rule match criteria fields available for configuration depend on the selected ACL type. For information about the possible match criteria fields, see the following table. ACL Based On Fields Destination MAC • Destination MAC. Specify the destination MAC address to compare against an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword might be specified using a destination MAC address of 01:80:C2:xx:xx:xx. • Destination MAC Mask. Specify the destination MAC address mask, which represents the bits in the destination MAC address to compare against an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword might be specified using a destination MAC mask of 00:00:00:ff:ff:ff. • VLAN. Specify the VLAN ID to match within the Ethernet frame. Source MAC • Source MAC. Specify the source MAC address to compare against an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. • Source MAC Mask. Specify the source MAC address mask, which represents the bits in the source MAC address to compare against an Ethernet frame. The valid format is (xx:xx:xx:xx:xx:xx). • VLAN. Specify the VLAN ID to match within the Ethernet frame. Destination IPv4 • Destination IP Address. Specify the destination IP address. • Destination IP Mask. Specify the destination IP address mask. Source IPv4 • Source IP Address. Specify the source IP address. • Source IP Mask. Specify the source IP address mask. Destination IPv6 • Destination Prefix. Specify the destination prefix. • Destination Prefix Length. Specify the destination prefix length. Source IPv6 • Source Prefix. Specify the source destination prefix. • Source Prefix Length. Specify the source prefix length. Destination IPv4 L4 Port • Destination L4 port (protocol). Specify the destination IPv4 L4 port protocol. • Destination L4 port (value). Specify the destination IPv4 L4 port value. Manage Device Security 333