Netgear GS418TPP User Manual - Page 414

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Copy an Image You can copy an image from one location (primary or backup) to another.  To copy an image: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Maintenance > File Management > Copy. 6. Select the Source Image image1 or image2 radio button to specify the image to be copied. 7. Select the Destination Image image1 or image2 radio button to specify the destination image. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Dual Image Settings The Dual Image feature allows the switch to retain two images in permanent storage. You can select which image to load during the next boot cycle, configure an image description, or delete an image. This feature reduces switch down time when you are upgrading or downgrading the software image. Maintenance 414