Netgear GS418TPP User Manual - Page 131

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The following table describes the nonconfigurable information displayed on the page. Table 31. LAG Configuration information Field LAG ID Active Ports LAG State Description Identification of the LAG. Indicates the ports that are actively participating in the port channel. Indicates whether the link is up or down. Configure LAG Membership You can select two or more full-duplex Ethernet links to be aggregated together to form a link aggregation group (LAG), which is also known as a port channel. The switch can treat the port channel as a single link.  To configure LAG membership: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> LAG > Basic > LAG Membership. 6. From the LAG ID menu, select the LAG ID. 7. In the LAG Name field, enter the name to be assigned to the LAG. Configure Switching 131