Netgear GS418TPP User Manual - Page 194

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Configure Multicast Router VLAN Settings  To configure multicast router VLAN settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > MLD Snooping > Multicast Router VLAN Configuration. 6. From the Interface menu, select the interface for which you want the multicast router to be enabled. 7. In the VLAN ID field, specify the VLAN ID. 8. From the Multicast Router menu, select to enable or disable the multicast router for the VLAN ID. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Switching 194