Netgear GS418TPP User Manual - Page 109
Statistics, Apply, To view and clear the DHCP snooping statistics, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The delay allows the device to collect as many entries as possible (new and removed) before writing them to the persistent file. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Statistics You can view and clear per-interface statistics about the DHCP messages filtered by the DHCP snooping feature on untrusted interfaces. To view and clear the DHCP snooping statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System> Services > DHCP Snooping > Statistics. 6. Click the Clear button to clear all interfaces statistics. Configure System Information 109