Netgear GS418TPP User Manual - Page 31
View and Con the Switch Management Settings, View or Define System Information
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP View and Configure the Switch Management Settings This section describes how to display the switch status and specify some basic switch information, such as the management interface IP address, system clock settings, and DNS information. The following sections describe how you can configure the switch management settings: • View or Define System Information on page 31 • View the System CPU Status on page 36 • View USB Device Information on page 39 • IP Configuration on page 40 • IPv6 Network Configuration on page 42 • View the IPv6 Network Neighbor on page 43 • Configure the Time Settings on page 44 • Configure Denial of Service Settings on page 60 • Configure DNS Settings on page 63 • Configure Green Ethernet Settings on page 67 View or Define System Information When you log in, the System Information page displays. Use this page to configure and view general device information. To view or define system information: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. Configure System Information 31