Netgear GS418TPP User Manual - Page 423
To send an IPv6 traceroute, Password, password, Maintenance > Troubleshooting > Traceroute
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 423 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP If a reply to the traceroute is received, the following message displays: 1 a:b:c:d:e:f:g 9869 usec 9775 usec 10584 usec 2 0:0:0:0:0:0:0:0 0 usec * 0 usec * 0 usec * Hop Count = p Last TTL = q Test attempt = r Test Success = s. To send an IPv6 traceroute: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Maintenance > Troubleshooting > Traceroute IPv6. 6. In the IPv6 Address/Host Name field, enter the IPv6 address or host name of the device for which the path must be discovered. 7. In the Probes Per Hop field, enter the number of probes per hop. The default value is 3. The range is 1 to 10. 8. In the Max TTL field, enter the maximum time to live (TTL) for the destination. The default value is 30. The range is 1 to 255. Maintenance 423