Netgear GS418TPP User Manual - Page 113

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP A VLAN can be configured to use this ARP ACL containing rules as the filter for ARP packet validation. The name can be 1 to 31 alphanumeric characters. The ARP ACL name is deleted if you specify N/A. 10. From the Static Flag menu, select whether ARP packets need validation by using the DHCP snooping database if the ARP ACL rules do not match: • Select Enable to enable validation of ARP packets by ARP ACL rules only. • Select Disable to enable validation of ARP packets using DHCP snooping entries. The default is Disable. 11. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure DAI on an Interface  To configure DAI on LAG1 as a trusted port and rate limiting for ports 1-10: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System> Services > Dynamic ARP Inspection > DAI Interface Configuration. 6. Click the LAG link to view all LAG interfaces. Configure System Information 113