Netgear GS418TPP User Manual - Page 223

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 12. From the Onlink Flag menu, select Enable or Disable to specify whether the selected prefix can be used for on-link determination. The default is Enable. 13. From the Autonomous Flag menu, select Enable or Disable to specify whether the selected prefix can be used for autonomous address configuration. The default value is Enable. The Current State field displays the state of the IPV6 address. The state is TENT if routing is disabled or DAD fails. The state is Active if the interface is active and DAD is successful. 14. Click the Add button. The IPv6 address is added to the interface. 15. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. View IPv6 Statistics  To view IPv6 interface statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> IPv6 > Advanced > Statistics. Configure Routing 223