Netgear GS418TPP User Manual - Page 149

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP GARP is part of the IEEE 802.1p extension to its 802.1D (spanning tree) specification. It includes the following: • GARP Information Declaration (GID). The part of GARP that generates data. • GARP Information Propagation (GIP). The part of GARP that distributes data. Note: It can take up to 10 seconds for the GARP configuration changes to take effect.  To configure GARP switch settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> VLAN > Advanced > GARP Switch Configuration. 6. Select the GVRP Mode Disable or Enable radio button. This selects the GARP VLAN registration protocol administrative mode for the switch. The default is Disable. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Switching 149