Netgear GS418TPP User Manual - Page 309

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The updated configuration is sent to the switch. Configuration changes take effect immediately. Manage Port Authentication You can enable and configure port access control on one or more ports. Configure 802.1X Settings for a Port  To configure 802.1X settings for a port: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Port Authentication > Advanced > Port Authentication. The previous figure shows only part of the page. 6. Use the horizontal scroll bar at the bottom of the page to view all the fields. 7. Select the check box next to the port. You can also select multiple check boxes to apply the same settings to the selected ports, or select the check box in the heading row to apply the same settings to all ports. 8. Specify the following settings: • Port Control. Defines the port authorization state. The control mode is set only if the link status of the port is link up. Select one of the following options: - Auto. The switch automatically detects the mode of the interface. Manage Device Security 309