Netgear GS418TPP User Manual - Page 251

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The default password is password. The System Information page displays. 5. Select QoS> CoS > Basic > CoS Configuration. 6. Either configure the same CoS trust mode settings for all CoS-configurable interfaces or configure CoS settings per interface. By default, the Global radio button is selected. • To configure the same CoS trust mode settings for all CoS configurable interfaces, do the following: a. Select the Global radio button. b. From the Global Trust Mode menu, select one of the following trust mode options for ingress traffic on the switch: - Untrusted. Do not trust any CoS packet marking at ingress. - 802.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The QoS setting lets you map each of the eight priority levels to one of seven internal hardware priority queues. The default mode is 802.1p. - DSCP. The six most significant bits of the DiffServ field are called the Differentiated Services Code Point (DSCP) bits. • To configure CoS settings per interface, do the following: a. Select the Interface radio button. b. From the Interface Trust Mode menu, select one of the following trust mode options: - Untrusted. Do not trust any CoS packet marking at ingress. - 802.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The QoS setting lets you map each of the eight priority levels to one of seven internal hardware priority queues. The default mode is 802.1p. - DSCP. The six most significant bits of the DiffServ field are called the Differentiated Services Code Point (DSCP) bits. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Quality of Service 251