Netgear GS418TPP User Manual - Page 36

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Scroll down to the Versions section. 6. To refresh the page, click the Update button. The following table describes the nonconfigurable information displayed in the Versions section of the System Information page. Table 8. Versions information Field Model Name Boot Version Software Version Description The model name of the switch. The version of the bootloader software of the switch. The version number of the code currently running on the switch. View the System CPU Status You can monitor the CPU, memory resources, and utilization patterns across various intervals to assess the performance, load, and stability parameters of member units.  To view the system CPU status: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. Configure System Information 36