Netgear GS418TPP User Manual - Page 256
DSCP to Queue Mapping, Apply, To map DSCP values to queues, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues to be sent. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. DSCP to Queue Mapping You can map an internal traffic class to a DSCP value. To map DSCP values to queues: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select QoS > CoS > Advanced > DSCP to Queue Mapping. 6. For each DSCP value, select from the corresponding Queue menu which internal traffic class must be mapped to the DSCP value. Configure Quality of Service 256