Netgear GS418TPP User Manual - Page 177

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The default password is password. The System Information page displays. 5. Select Switching> Multicast > IGMP Snooping > Configuration. 6. Select the IGMP Snooping Status Enable or Disable radio button. This specifies the administrative mode for IGMP snooping for the switch. The default is Disable. 7. Select the Validate IGMP IP header Enable or Disable radio button. When IGMP IP header validation is enabled, any IGMP IP header must include the Router Alert, ToS, and TTL information. Otherwise, the IGMP packet is discarded. The default value is Enable. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. 9. To refresh the page with the latest information about the switch, click the Update button. The following table displays information about the global IGMP snooping status and statistics on the page. Table 47. IGMP Snooping Configuration information Field Multicast Control Frame Count Interfaces Enabled for IGMP Snooping VLAN IDs Enabled For IGMP Snooping VLAN IDs Enabled For IGMP Snooping Querier Description The number of multicast control frames that are processed by the CPU. The interfaces that are enabled for IGMP snooping. The IDs of the VLANs that are enabled for IGMP snooping. The IDs of the VLANs that are enabled for IGMP snooping querier. Configure Switching 177