Netgear GS418TPP User Manual - Page 361

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Configure IPv6 Rules You can display the rules for the IPv6 access control lists, which you create using the IPv6 Access Control List Configuration page. By default, no specific value is in effect for any of the IPv6 ACL rules. Add a Rule for an IPv6 ACL  Add a rule for an ACL IPv6: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > ACL > Advanced > IPv6 Rules. The previous figure does not show all columns on the page. If no rules exists, the IPv6 ACL Rule Table shows the message No rules have been configured for this ACL. If one or more rules exist for the ACL, the rules display in the IPv6 ACL Rule Table. 6. From the ACL Name menu, select the IPv6 ACL for which you want to add a rule. An IPv6 ACL can contain up to 50 rules. 7. Click the Add button. Manage Device Security 361