Netgear GS418TPP User Manual - Page 48
Con the Global SNTP Settings
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Configure the Global SNTP Settings To configure the global SNTP settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Time > Time Configuration > SNTP Global Configuration. When you select the SNTP option as the clock source, the SNTP Global Configuration section is displayed below the Time Configuration section of the page. 6. Select a Client mode radio button to specify the mode of operation of the SNTP client: • Disable. SNTP is not operational. No SNTP requests are sent from the client and no received SNTP messages are processed. • Unicast. SNTP operates in a point-to-point fashion. A unicast client sends a request to a designated server at its unicast address and expects a reply from which it can Configure System Information 48