Netgear GS418TPP User Manual - Page 350
Modify the Match Criteria for a Basic IP ACL Rule, Security > ACL > Advanced > IP Rules
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • Redirect Interface. From the Redirect Interface menu, select the egress interface to which the matching traffic stream must be redirected, bypassing any forwarding decision normally performed by the switch. This field cannot be set if a mirror interface is already configured for the IP ACL rule. • Src IP Address. Enter an IP address using dotted-decimal notation to be compared to a packet's source IP address as a match criterion for the selected IP ACL rule. • Src IP Mask. Specify the IP mask in dotted-decimal notation to be used with the source IP address value. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Modify the Match Criteria for a Basic IP ACL Rule To modify the match criteria for a basic IP ACL rule: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > ACL > Advanced > IP Rules. The IP Rules page displays. 6. From the ACL ID menu, select the ACL that includes the rule that you want to modify. 7. In the Basic ACL Rule Table, click the rule. The rule is a hyperlink. The Standard ACL Rule Configuration page displays. 8. Modify the basic IP ACL rule criteria. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Manage Device Security 350