Netgear GS418TPP User Manual - Page 262
Source MAC, Address, Destination MAC, Protocol Type, Other, Source L4 Port
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • Source MAC. Select this radio button to require a packet's source MAC address to match the specified MAC address. After you select this radio button, use the following fields to configure the source MAC address match criteria: - Address. The source MAC address to match. The source MAC address is specified as six two-digit hexadecimal numbers separated by colons. - Mask. The MAC mask, which specifies the bits in the source MAC address to compare against the Ethernet frame. Use Fs and zeros to configure the MAC mask. An F means that the bit is checked, and a zero in a bit position means that the data is not significant. For example, if the MAC address is aa:bb:cc:dd:ee:ff, and the mask is ff:ff:00:00:00:00, all MAC addresses with aa:bb:xx:xx:xx:xx result in a match (where x is any hexadecimal number). Note that this is not a wildcard mask, which ACLs use. • Destination MAC. Select this radio button to require a packet's destination MAC address to match the specified MAC address. After you select the radio button, use the following fields to configure the destination MAC address match criteria: - Address. The destination MAC address to match. The destination MAC address is specified as six two-digit hexadecimal numbers separated by colons. - Mask. The MAC mask, which specifies the bits in the destination MAC address to compare against an Ethernet frame. Use Fs and zeros to configure the MAC mask. An F means that the bit is checked, and a zero in a bit position means that the data is not significant. For example, if the MAC address is aa:bb:cc:dd:ee:ff, and the mask is ff:ff:00:00:00:00, all MAC addresses with aa:bb:xx:xx:xx:xx result in a match (where x is any hexadecimal number). Note that this is not a wildcard mask, which ACLs use. • Protocol Type. Select this radio button to require a packet's Layer 4 protocol to match the specified protocol, which you must select from the menu. The menu includes Other as a selection, which lets you enter a protocol number from 0 to 255. • Source IP. Select this radio button to require a packet's source IP address to match the specified IP address. After you select the radio button, use the following fields to configure the source IP address match criteria: - Address. The source IP address format to match in dotted-decimal. - Mask. The bit mask in IP dotted-decimal format indicating which parts of the source IP address to use for matching against packet content. • Source L4 Port. Select this radio button to require a packet's TCP/UDP source port to match the specified protocol, which you must select from the menu. The range is 0 to 65535. The menu includes Other as an option for unnamed ports. • Destination IP. Select this radio button to require a packet's destination IP address to match the specified IP address. After you select the radio button, use the following fields to configure the destination IP address match criteria: - Address. The destination IP address format to match in dotted-decimal. - Mask. The bit mask in IP dotted-decimal format indicating which parts of the destination IP address to use for matching against packet content. Configure Quality of Service 262