Netgear GS418TPP User Manual - Page 244

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Table 67. ARP cache information (continued) Field Type Age Description The type of ARP entry. Possible values are as follows: • Local. An ARP entry associated with one of the switch's routing interface's MAC addresses. • Gateway. A dynamic ARP entry whose IP address is that of a router. • Static. An ARP entry configured by the user. • Dynamic. An ARP entry that was learned by the router. The time since the entry was last refreshed in the ARP table (in seconds). Add an Entry to the ARP Table You can add an entry to the Address Resolution Protocol (ARP) table.  To add an entry to the ARP table: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> ARP > Advanced > ARP Create. 6. In the IP Address field, specify an IP address. This must be the IP address of a device on a subnet attached to one of the switch's existing routing interfaces. Configure Routing 244