Netgear GS418TPP User Manual - Page 152
Switching > Auto-VoIP > Protocol-based > Port Settings, Prioritization Type
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP To configure protocol-based port settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Auto-VoIP > Protocol-based > Port Settings. 6. From the Prioritization Type menu, select Traffic Class or Remark. This specifies the type of prioritization. 7. From the Class Value menu, specify the CoS tag value to be reassigned for packets received on the voice VLAN when Remark CoS is enabled. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Switching 152