Netgear GS418TPP User Manual - Page 179
View the IGMP Snooping Table, Switching > Multicast > IGMP Snooping > IGMP Snooping Table
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 9. In the Max Response Time field, specify the time that the switch must wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value greater or equal to 1 and less than the group membership interval in seconds. The default is 10 seconds. The configured value must be less than the group membership interval. 10. In the MRouter Timeout field, specify the time that the switch must wait to receive a query on an interface before removing it from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero indicates an infinite time-out, that is, no expiration. 11. From the Fast Leave Mode menu, select whether fast leave mode is enabled. The option are Enable and Disable. The default is Disable. 12. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. View the IGMP Snooping Table You can view all of the entries in the Multicast Forwarding Database that were created for IGMP snooping. To view the entries in the IGMP snooping table: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > IGMP Snooping > IGMP Snooping Table. The IGMP Snooping Table page displays. 6. In the Search By MAC Address field, specify the MAC address whose MFDB table entry you want to view. Configure Switching 179