Netgear GS418TPP User Manual - Page 38

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > System CPU Status > CPU Threshold. 6. Specify the thresholds: • Rising Threshold. Notification is generated when the total CPU utilization exceeds this threshold value over the configured time period. The range is 1 to 100. • Rising Interval. This utilization monitoring time period can be configured from 5 to 86400 seconds in multiples of 5 seconds. • Falling Threshold. Notification is triggered when the total CPU utilization falls below this level for a configured period of time. The falling utilization threshold must be equal to or less than the rising threshold value. The falling utilization threshold notification is sent only if a rising threshold notification was sent previously. Configuring the falling utilization threshold and time period is optional. If the Falling CPU utilization parameters are not configured, the parameters automatically get the same values as the Rising CPU utilization parameters. The range is 1 to 100. • Falling Interval. The utilization monitoring time period can be configured from 5 seconds to 86400 seconds in multiples of 5 seconds. • Free Memory Threshold. The free memory threshold value for the CPU in KB. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure System Information 38