Netgear GS418TPP User Manual - Page 427
Apply, File Name, Write Core, Save Current Settings
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 427 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP b. Click the Apply button. A pop-up window opens and displays the test results. You can verify if the configured settings are correct and if the USB device is accessible. The core dump file name that you entered in the File Name field is used as the destination. 13. To write a core dump to the USB device (available only if you specified USB as the protocol), do the following: a. Select the Write Core check box. CAUTION: The switch reboots after you click the Apply button. b. Click the Apply button. The core dump is written to the USB device and the switch reboots. 14. To save the configuration settings, select the Save Current Settings check box. By default, this check box is selected. You can clear the check box only if you first select the Write Core check box. CAUTION: Make sure that the Write Core check box is cleared when you click the Apply button. Otherwise, the switch reboots. 15. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Maintenance 427