Netgear GS418TPP User Manual - Page 403

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP  To reset the switch to the factory default settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Maintenance > Reset > Factory Default. 6. Select the check box. 7. Click the Apply button. A confirmation pop-up window opens. 8. Click the Yes button to confirm. All configuration settings are reset to their factory default values. All changes that you made are lost, even if you saved the configuration. Export a File From the Switch You can export configuration (ASCII or log ASCII) files from the switch to a file server by using TFTP or HTTP. Model GS418TPP also lets you use USB. The following sections describe how you can export a file from the switch: • Export a File to the TFTP Server on page 404 • HTTP File Export on page 405 • Export a File From the Switch to a USB Device on page 406 Maintenance 403