Netgear GS418TPP User Manual - Page 105

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The System Information page displays. 5. Select System> Services > DHCP Snooping > Global Configuration. The DHCP Snooping Global Configuration page displays. 6. In the VLAN ID field, specify the VLAN on which DHCP snooping is enabled. 7. From the DHCP Snooping Mode menu, select Enable. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Interface Configuration You can view and configure each port as a trusted or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a port is configured as untrusted, any DHCP (or BootP) responses received on that port are discarded.  To configure DHCP snooping interface settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System> Services > DHCP Snooping > Interface Configuration. 6. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. Configure System Information 105