Netgear GS418TPP User Manual - Page 199

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 9. From the MVR Mode menu, specify the MVR mode of operation. The options are compatible and dynamic. The default is compatible. 10. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. 11. To refresh the page with the latest information about the switch, click the Update button. The following table describes the nonconfigurable information displayed on the page. Table 52. MVR Configuration information Field MVR Max Multicast Groups MVR Current Multicast Groups Definition The maximum number of multicast groups that MVR supports. The number of MVR groups allocated. Configure an MVR Group  To configure an MVR group: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > MVR > Advanced > MVR Group Configuration. 6. In the MVR Group IP field, specify the IP address for the new MVR group. 7. In the Count field, specify the number of contiguous MVR groups. Configure Switching 199