Netgear GS418TPP User Manual - Page 334

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP ACL Based On Fields Source IPv4 L4 Port • Source L4 port (protocol). Specify the source IPv4 L4 port protocol. • Source L4 port (value). Specify the source IPv4 L4 port value. Destination IPv6 L4 Port • Destination L4 port (protocol). Specify the destination IPv6 L4 port protocol. • Destination L4 port (value). Specify the destination IPv6 L4 port value. Source IPv6 L4 Port • Source L4 port (protocol). Specify the source IPv6 L4 port protocol. • Source L4 port (value). Specify the source IPv6 L4 port value. 11. For this procedure (in which an ACL based on the destination MAC address is created), configure the following settings: a. In the Destination MAC field, specify the destination MAC address that must be compared against the information in an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination MAC address of 01:80:C2:xx:xx:xx. b. In the Destination MAC Mask field, specify the destination MAC address mask that must be compared against the information in an Ethernet frame. The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination MAC mask of 00:00:00:ff:ff:ff. c. In the VLAN ID field, specify which VLAN must be compared against the information in an Ethernet frame. Valid range of values is 1 to 4093. Either a VLAN range or VLAN can be configured. d. In the Binding Configuration section, from the Direction menu, select the packet filtering direction for the ACL. Only the inbound direction is valid. e. In the Ports and LAG tables in the Binding Configuration section, select the ports and LAGs to which the ACL must be applied. f. Click the Add button. The rule is added to the ACL and is based on the destination MAC. 12. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Modify an ACL Rule  To modify an ACL rule: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. Manage Device Security 334