Netgear GS418TPP User Manual - Page 200

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP This number helps you to create multiple MVR groups through a single click of the Add button. If the field is empty, then clicking the button creates only one new group. The field is displayed as empty for each particular group. The range is from 1 to 256. 8. Click the Add button. The MVR group is added. The following table describes the nonconfigurable information displayed on the page. Table 53. MVR Group Configuration Field Status Members Definition The status of the specific MVR group. The list of ports that participate in the specific MVR group. Configure an MVR Interface  To configure an MVR interface: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > MVR > Advanced > MVR Interface Configuration. Configure Switching 200