Netgear GS418TPP User Manual - Page 328

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 6. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 7. From the Port VLAN Mode menu, select the switch port mode: • General. Sets the interfaces in general mode, which is the default selection. • Host. Sets the interfaces in host mode, which is used for private VLAN configurations. • Promiscuous. Sets the interfaces in promiscuous mode, which is used for private VLAN configurations. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure a Private VLAN Host Interface  To configure a private VLAN host interface: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. Manage Device Security 328