Netgear GS418TPP User Manual - Page 146

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> VLAN > Advanced > Protocol Based VLAN Group Membership. 6. From the Group ID menu, select the protocol-based VLAN group ID. The Group Name field shows the name that is associated with the group. 7. In the Ports table and LAG table, click each port and LAG that you want to include in the protocol-based VLAN group. A protocol-based VLAN group can include both port and LAGs. A selected port or LAG is displayed by a check mark. 8. Click the Apply button The updated configuration is sent to the switch. Configuration changes take effect immediately. 9. To show the current numbers in the selected protocol-based VLAN group, click the Current Members button. Configure Switching 146