Netgear GS418TPP User Manual - Page 209
Con Layer 2 Loop Protection on a Port, Apply, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 10. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Layer 2 Loop Protection on a Port To configure L2 loop protection on a port: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > L2 Loop Protection > L2 Loop Protection Configuration. 6. Use one of the following methods to narrow down the ports that are displayed: • To display all the physical ports, click the 1 link. • To display all LAGs only, click the LAG link. • To display all ports and LAGs, click the All link. • In the Go To Port field, type the port number, for example g18, and click the Go button. 7. In the Port field, select the port for which data is to be displayed or configured. Configure Switching 209