Netgear GS418TPP User Manual - Page 455

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Table 99. General feature default settings (continued) Feature Name/Setting Auto-VoIP, OUI-Based Admin Mode Auto-VoIP VLAN OUI-based priority L2 Loop Protection Admin Mode Default Disabled None 7 Disabled System Setup and Maintenance Settings The following table describes the system setup and maintenance settings. Table 100. System setup and maintenance settings Feature Boot code update DHCP/manual IP System name configuration Configuration save/restore Firmware upgrade Restore defaults Dual image support Factory reset Sets Supported 1 1 1 1 1 1 (web and front-panel button) 1 1 Default N/A DHCP enabled/192.168.0.239 NULL N/A N/A N/A Enabled N/A Port Characteristics The following table describes the port characteristics. Table 101. Port characteristics Feature Sets Supported Default Auto negotiating speed and full/half duplex All ports Auto negotiation Auto MDI/MDIX for cross over cables on all ports Enabled 802.3x flow control/back pressure All ports Disabled Specifications and Default Settings 455