Netgear GS418TPP User Manual - Page 37
Con the CPU Thresholds, password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The default password is password. The System Information page displays. 5. Select System > Management > System CPU Status > System CPU Status. The CPU Utilization section shows the memory information, task-related information, and percentage of CPU utilization per task. The following table describes CPU Memory Status information. Table 9. CPU Memory Status information Field Total System Memory Available Memory Description The total memory of the switch in KBytes. The available memory space for the switch in KBytes. Configure the CPU Thresholds The CPU Utilization Threshold notification feature allows you to configure thresholds that, when exceeded, trigger a notification. The notification occurs through SNMP trap and syslog messages. To configure the CPU thresholds: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. Configure System Information 37