Netgear GS418TPP User Manual - Page 68
Con Green Ethernet Interface Settings
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Configure Green Ethernet Interface Settings You can configure per-port Green Ethernet settings. To configure the Green Ethernet interface settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Green Ethernet > Green Ethernet Interface Configuration. 6. Do one of the following: • In the Go To Interface field, enter the port using the respective naming convention (for example, g1 or l1), and click the Go button. The entry corresponding to the specified interface is selected. For more information about naming conventions, see Interface Naming Conventions on page 23. • Select the port. 7. From the EEE mode menu, select Enable or Disable. The default is Disable. If the EEE mode is not supported, then N/A is displayed. 8. Click the Apply button. Configure System Information 68