Netgear GS418TPP User Manual - Page 247

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 10. Select the Dynamic Renew Enable or Disable radio button. When enabled, the ARP component automatically attempts to renew dynamic ARP entries when they age out. The default setting is Enable. 11. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Remove an ARP Entry From the ARP Cache You can remove entries from the ARP table.  To remove entries from the ARP table: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> ARP > Advanced > ARP Entry Management. 6. From the Remove From Table menu, select the type of ARP entry to be deleted: • All Dynamic Entries • All Dynamic and Gateway Entries • Specific Dynamic/Gateway Entry. Lets you specify the IP address to be removed. • Specific Static Entry. Lets you specify the IP address to be removed. 7. If you select Specific Dynamic/Gateway Entry or Specific Static Entry, in the Remove IP Address field, enter the IP address to be removed. Configure Routing 247