Netgear GS418TPP User Manual - Page 326

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Traffic Control > Private VLAN > Private VLAN Type Configuration. 6. Select the check box that is associated with the VLAN ID that you want to configure. 7. From the Private VLAN Type menu, select the type of private VLAN. Possible values are as follows: • Primary. Sets the private VLAN type as primary. • Isolated. Sets the private VLAN type as isolated. • Community. Sets the private VLAN type as community. • Unconfigured. Sets the private VLAN type as unconfigured. The default is Unconfigured. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Private VLAN Association Settings  To configure private VLAN association: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Traffic Control > Private VLAN > Private VLAN Association Configuration. Manage Device Security 326