Netgear GS418TPP User Manual - Page 304

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • SSL DH Strong Encryption Parameter PEM File. SSL Diffie-Hellman Strong Encryption Parameter File (PEM Encoded) 7. From the Server Address Type menu, select IPv4, IPv6, or DNS to indicate the format of the TFTP/SFTP/SCP Server Address field. The default is IPv4. 8. In the TFTP Server IP field, specify the address of the TFTP server. The address can be an IP address in standard x.x.x.x format or a host name. The host name must start with a letter of the alphabet. Make sure that the software image or other file to be downloaded is available on the TFTP server. 9. In the Remote File Path field, enter the path of the file to download. You can enter up to 96 characters. The default is blank. 10. In the Remote File Name field, enter the name of the file on the TFTP server to download. You can enter up to 32 characters. The default is blank. 11. Select the Start File Transfer check box. 12. Click the Apply button. The file transfer starts. A status message displays during the transfer and upon successful completion of the transfer. Access Control Access control allows you to configure a profile and set access rules. Configure an Access Control Profile You can set up a security access profile.  To configure an access profile: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. Manage Device Security 304