Netgear GS418TPP User Manual - Page 196

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • Querier Expiry Interval(secs). Specify the interval in seconds after which the last querier information is removed. The querier expiry interval must be a value in the range of 60 to 300. The default value is 60. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The page displays VLAN IDs enabled for the MLD snooping querier. Configure MLD Snooping Querier VLAN Settings  To configure MLD snooping querier VLAN settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > MLD Snooping > Querier VLAN Configuration. 6. In the VLAN ID field, specify the VLAN ID on which the MLD snooping querier is administratively enabled and for which a VLAN exists in the VLAN database. 7. From the Querier Election Participate Mode menu, select to enable or disable the querier participation election mode for MLD snooping. When this mode is disabled, on detecting another querier of same version in the VLAN, the snooping querier moves to a non-querier state. When this mode is enabled, the snooping querier participates in querier election where the lowest IP address wins the querier election and operates as the querier in that VLAN. The other querier moves to non-querier state. Configure Switching 196