Netgear GS418TPP User Manual - Page 380

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Table 92. Detailed port statistics Field ifIndex Port Type Port Channel ID Port Role STP Mode STP State Admin Mode Flow Control Mode LACP Mode Physical Mode Physical Status Link Status Link Trap Description This object indicates the ifIndex of the interface table entry associated with this port on an adapter. For normal ports this field displays Normal. Otherwise, the possible values are as follows: • Mirrored. This port is a participating in port mirroring as a mirrored port. Look at the Port Mirroring pages for more information. • Probe. This port is a participating in port mirroring as the probe port. Look at the Port Mirroring pages for more information. • Trunk Member. The port is a member of a link aggregation trunk. Look at the Port Channel pages for more information. If the port is a member of a port channel, the port channel's interface ID and name are shown. Otherwise, Disable is shown. Each MST bridge port that is enabled is assigned a port role for each spanning tree. The port role is one of the following values: Root, Designated, Alternate, Backup, Master, or Disabled. The Spanning Tree Protocol administrative mode that is associated with the port or port channel. The possible values are as follows: • Enable. Spanning tree is enabled for this port. • Disable. Spanning tree is disabled for this port. The port's current Spanning Tree state. This state controls what action a port takes on receipt of a frame. If the bridge detects a malfunctioning port, it places that port into the broken state. The states are defined in IEEE 802.1D: • Disabled • Blocking • Listening • Learning • Forwarding • Broken The port control administration state. The port must be enabled for it to be allowed into the network. The default is Enabled. Indicates whether flow control is enabled or disabled for the port. This field is not valid for LAG interfaces. Indicates the Link Aggregation Control Protocol administrative state. The mode must be enabled for the port to participate in link aggregation. Indicates the port speed and duplex mode. In autonegotiation mode the duplex mode and speed are set from the autonegotiation process. Indicates the port speed and duplex mode. Indicates whether the link is up or down. Indicates whether or not the port sends a trap when link status changes. Monitor the System 380