Netgear GS418TPP User Manual - Page 34

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP View the Fan Status Note: The fan status information is available for models GS418TPP and GS510TPP only. You can view the status of the fans in all units. These fans remove the heat generated by the power, CPU, and other components, and allow the switch to function normally.  To view the fan status: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Scroll down to the Fans section. 6. To refresh the page, click the Update button. The following table describes the nonconfigurable fan status information. Table 6. Fan status Field FAN Description Type Speed Duty level(%) State Description The fan index used to identify the fan for the switch. The description of the temperature sensor. Specifies whether the fan module is fixed or removable. The fan speed. The duty level of the fan. Specifies whether the fan is operational. Configure System Information 34