Netgear GS418TPP User Manual - Page 229
Search by Interface, Interface, Search, Clear, Update, Table 63., IPv6 Neighbor Table information
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP If the address exists, the entry is displayed. An exact match is required. • Search by Interface. Select Interface from the Search menu. Enter the interface using the respective naming convention (for example, g1 or l1). Then click the Go button. If the address exists, the entry is displayed. 7. To clear the IPv6 neighbors on a selected interface or on all interfaces, click the Clear button. 8. To refresh the page with the latest information about the switch, click the Update button. The following table describes the nonconfigurable data that is displayed. Table 63. IPv6 Neighbor Table information Field Interface IPv6 Address MAC Address isRtr Neighbor State Last Updated Description The interface whose settings are displayed in the current table row. The IPv6 address of the neighbor or interface. The MAC address associated with an interface. Indicates whether the neighbor is a router. If the neighbor is a router, the value is True. If the neighbor is not a router, the value is False. The state of the neighbor cache entry. Following are the states for dynamic entries in the IPv6 neighbor discovery cache: • Incmp. Address resolution is being performed on the entry. A neighbor solicitation message was sent to the solicited-node multicast address of the target, but the corresponding neighbor advertisement message is not yet received. • Reach. Positive confirmation was received within the last Reachable Time milliseconds that the forward path to the neighbor was functioning properly. While in REACH state, the device takes no special action as packets are sent. • Stale. More than Reachable Time milliseconds elapsed since the last positive confirmation was received that the forward path was functioning properly. While in STALE state, the device takes no action until a packet is sent. • Delay. More than Reachable Time milliseconds elapsed since the last positive confirmation was received that the forward path was functioning properly. A packet was sent within the last DELAY_FIRST_PROBE_TIME seconds. If no reachability confirmation is received within DELAY_FIRST_PROBE_TIME seconds of entering the DELAY state, send a neighbor solicitation message and change the state to PROBE. • Probe. Seeks a reachability confirmation by resending neighbor solicitation messages every Retrans Timer milliseconds until a reachability confirmation is received. The time since the address was confirmed to be reachable. Configure Routing 229