Netgear GS418TPP User Manual - Page 55

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Time > SNTP Server Configuration. The SNTP Server Configuration page displays. 6. Select the check box next to the configured server. 7. Specify new values in the available fields. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Remove an SNTP Server  To remove an SNTP server: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Time > SNTP Server Configuration. The SNTP Server Configuration page displays. 6. Select the check box next to the configured server to remove. 7. Click the Delete button. The entry is removed, and the device is updated. Configure System Information 55