Netgear GS418TPP User Manual - Page 296
Con the Dot1x Authentication List
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP • TACACS+. The user's ID and password are authenticated using the TACACS+ server. If you select RADIUS or TACACS+ as the first method and an error occurs during the authentication, the switch attempts user authentication Method 2. • None. The authentication method is unspecified. This option is only available for Method 2 and Method 3. 8. From the menu in the 2 column, select the authentication method, if any, that must be used second in the selected authentication login list. This is the method that is used if the first method times out. If you select a method that does not time out as the second method, the third method is not tried. 9. From the menu in the 3 column, select the authentication method, if any, that must be used third in the selected authentication login list. 10. From the menu in the 4 column, select the method, if any, that must be used fourth in the selected authentication login list. This is the method that is used if all previous methods time out. 11. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure the Dot1x Authentication List The Dot1x authentication list defines the IEEE 802.1X authentication method used for the default list. The default list is dot1xList. To configure the dot1x authentication list: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Management Security > Authentication List > Dot1x Authentication List. Manage Device Security 296