Netgear GS418TPP User Manual - Page 236

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP uses the link MTU as the IP MTU. The link MTU is the maximum frame size minus the length of the Layer 2 header. 10. Click the Add button. The VLAN routing interface is added for the selected VLAN ID. The entry in the MAC Address field is automatically entered. The following table describes the nonconfigurable information displayed on the page. Table 65. VLAN Routing Configuration information Field Port MAC Address Routing Mode Description The interface that is assigned to the VLAN for routing. The MAC address that is assigned to the VLAN routing interface. Indicates whether routing is enabled for the VLAN routing Interface. Delete a VLAN Routing Interface You can delete a VLAN routing interface that you no longer need.  To delete a VLAN routing interface: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> VLAN > VLAN Routing Configuration. The VLAN Routing Configuration page displays. 6. From the VLAN menu, select the VLAN. 7. Click the Delete button. The VLAN routing interface is removed. The VLAN itself is not removed. Configure Routing 236