Netgear GS418TPP User Manual - Page 121
System > Timer Schedule > Advanced > Timer Schedule Configuration, b. Timer Schedule Type
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP To specify the settings for a PoE timer schedule that uses a recurring pattern: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System> Timer Schedule > Advanced > Timer Schedule Configuration. The Timer Schedule Configuration page displays. 6. In the Timer Schedule Selection section, make your selections from the following menus: a. Timer Schedule Name. Select the name of the timer schedule that you want to configure. You can select only names of schedules that you created (see Create a PoE Timer Schedule on page 119). b. Timer Schedule Type. Select Periodic. The fields in the Timer Schedule Configuration section might adjust to let you configure a timer schedule with a recurrence pattern. c. Timer Schedule Entry. To add a new entry, select new. Selecting an existing entry lets you make changes to that entry. 7. In the Timer Schedule Configuration section, specify the recurrence pattern: a. In the Time Start field, enter the time of day in the HH:MM format to specify when the timer schedule must start. b. In the Time End field, enter the time of day in the HH:MM format to specify when the timer schedule must stop. c. Next to the Date Start field, click the calendar icon and use the menus in the pop-up window to enter the date in the DD-Mon-YYY format to specify when the timer schedule must start. d. Either select the No End Date radio button or select the End Date radio button, and next to the End Date field, click the calendar icon and use the menus in the pop-up window to enter the date in the DD-Mon-YYY format to specify when the timer schedule must stop. Configure System Information 121