Netgear GS418TPP User Manual - Page 238

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Higher numbered addresses are preferred. You must enter an integer. The default value is 0. 11. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Manage Routes The routing table collects routes from multiple sources: static routes and local routes. The routing table can learn multiple routes to the same destination from multiple sources. The routing table lists all routes. Configure a Basic Route  To configure a basic route: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> Routing Table > Route Configuration. Configure Routing 238